BOSS RC-600 Loop Ripper
Checking for a saved folder…
Eject after transfers. Keep this tab open to edit offline.
Backup your settings, Retrieve all of your music with one click.
Copy recordings from your RC-600
BOSS USB instructions (PDF, p. 20)-
Turn on USB storage
Stop playback and save your loops. Press MENU, use the page arrows to find USB, then press knob 2.
Turn knob 1 to PREPARING…. Plug the pedal into your computer by USB. Wait for the BOSS RC-600 drive to appear.
-
Select the ROLAND folder
Click Connect RC-600. In the folder picker, open the pedal’s drive, select ROLAND, then confirm. Loop Ripper reads the settings and recordings inside.
-
Copy all your WAVs
Example WAV filename M10-Memory10____Track1_078.20-BPM_0006.14s_002-bars__8b.wav Memory 10 · Track 1 · 78.20 BPM · 6.14 s · 2 barsOn the Memory page, click Choose destination and pick a folder on your computer. Then click Extract all WAVs.
All recordings go into one dated folder. Sort by filename to see each memory’s tracks together.
-
Preview and copy one track
Example track selection Memory 10 → Track 1 Listen before copying the WAVOn the Memory page, select a slot with recordings. Click Preview next to a track to listen to it.
Click Extract track to copy its WAV to your chosen destination.
-
Back up the pedal
What to back up DATA/ · Saved settingsWAVE/ · Recorded tracks Keep DATA and WAVE together in ROLANDIn USB Storage mode, copy the pedal’s entire ROLAND folder to your computer before replacing memory contents.
To inspect that copy later, use Choose config directory and select the copied folder.
-
Save and push settings
Settings workflow Edit → ReviewSave Changes Check the memory slot or System scopeIn Routing, Assigns / MIDI Map, or Controls, use Save Changes to write pending edits to the selected config directory.
To save directly to the pedal, connect it in USB Storage mode and select its ROLAND folder when prompted.
-
Check which settings a memory uses
Where settings come from Memory → Settings for one slotSystem → Shared settings Check the scope for each groupSwitch to System/Global and open Preferences. Check whether each group uses its own settings per memory or shares System settings.
Check the relevant group before editing input, output, or pedal controls.
-
Trace a signal path
Example routing path INST 1 → MAIN Select a source to highlight its routesOpen Routing in the memory or System scope you want to inspect. Select an input on the diagram or in the legend.
Follow the highlighted connections. Click a destination circle to toggle that connection in your draft.
-
Inspect an FX bank
Example FX location Input FX → Bank A → Slot B The highlighted row is the saved active bankChoose a memory and open FX Banks. Find the highlighted row in the Input FX or Track FX grid.
Select a slot to see its saved effect, parameters, and any switches or Assigns that target it.
-
Load a saved config profile
Profile import workflow Import config profile → Review changesSave Changes Check the destination before applyingIn Routing, click Import Routing config profile. In Assigns / MIDI Map, click Import Assign config profile. Choose the saved JSON file. In Memory, import or export several categories together.
Review the changes, including settings that return to factory defaults. Click Save Changes to write the profile to the selected memory.
-
Plan a footswitch function
Example control selection Controls → Mode 1 → Switch 3 Select the mode used on the pedalOpen Controls in Memory or System scope. Choose a pedal mode and switch, then search for a function.
Use Export CTL/EXP profile to save a JSON copy. Reopen it with Import CTL/EXP profile.
-
Copy a memory
Memory copy checklist Memory Copy → DestinationCopy and replace memory The destination’s settings and recordings are replacedOn the Memory page, select the source slot and click Memory Copy. Choose the destination and review what will be replaced.
Confirm the copy, then select the open config directory when prompted. Use Memory Delete to restore a slot’s default settings and remove its recordings.